1000-watt Class D power modules in all models (2 × 500 W continuous)
Tour-grade 16 gauge steel grilles
Rugged, texture-painted birch enclosures
Four-position Mic/Line gain
Comfortable ergonomic handles35 mm pole sockets with Tilt-Direct™
M10 rigging points for suspended installation
Onboard mixer with two combo XLR and ¼⁻ᶦⁿᶜʰ inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance:
DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
Intrinsic Correction™, first featured in our high-end line-array products maps 65–75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
1000 W Class D (500 W LF + 500 W HF) continuous 2000 W peak
Channel A XLR / ¼⁻ᶦⁿᶜʰ:
Mic gain setting
Channel B XLR / ¼⁻ᶦⁿᶜʰ: 38 kΩ balanced / 19 kΩ unbalanced Channel B RCA: 10 kΩ
Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
Balanced female XLR/¼⁻ᶦⁿᶜʰ line/mic level input, Balanced female XLR/¼⁻ᶦⁿᶜʰ line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector